Vivitar Vivicam 3655, User Manual

Page: 20 / 37

19
Setting the Macro Mode
Pressing the Macro Mode button toggles between Normal and Macro Mode. Use the Macro mode setting to gain sharpness
and detail in pictures at close range between the objects 8cm to 40cm from the camera.
How to take Close-up shots
1. Set the camera to
RECORD RECORD RECORD RECORD RECORD
MODE.
2. Press the
Macro button Macro button Macro button Macro button Macro button
once to active macro mode.
3. Press the
Shutter button Shutter button Shutter button Shutter button Shutter button
half way to lock the focus and exposure.
4. Press the
Shutter button Shutter button Shutter button Shutter button Shutter button
all the way down to take the picture.
Enabled Macro Mode will cause the flash mode forced to OFF or ON. The Macro Mode button is active only in RECORD
Mode.
Setting the Self-Timer
Press the Self-Timer button once to active the self-timer. The Self-Timer creates a 10-second delay between the time you
press the Shutter button and the time the picture is taken. The 10-second delay is marked by the Self-Timer LED flashing, and
if “Beep On” is enabled (see Sound option under SETUP Mode), by beeping for the final three seconds.
The Self-Timer is automatically turned off after the picture is taken or if the camera is powered off.
The Self-Timer button is active only in RECORD Mode.
NOTE
NOTE
Overall Picture Quality
Best
Better
Good
Fine
Normal
Economy
Quality
Resolution
1792x1200
1792x1200
1792x1200
896x600
896x600
896x600