6
Note
:
After the camcorder is powered on, the SD icon will appear on the LCD display. If you do not
see the SD icon on the display, please check if the card was inserted properly.
Make sure the SD card is not locked (check the lock switch on the side of the SD card).
If the SD card is locked this will prevent the camcorder from saving captured photos to the
SD card.
3.
Powering ON the Camcorder
Press the
POWER
button to turn on the camcorder.
SETTING THE CAMCORDER LANGUAGE
1.
You will first be prompted to select a language for the camcorder. The Language selection menu
will appear. Press the
UP
/
DOWN
button to select the language of your choice and press the
SET
button to confirm the selection.
2.
After selecting a language, you will be asked if you would like to continue with the initial
camcorder
setup. A message will appear: “Continue with Camera Setup?”
3.
Press the
RIGHT
/
LEFT
button to s
elect “Yes” to continue or “No” to exit the setup, and then
press the
SET
button to confirm your selection.
