Vivax V DESIGN ACP-12CH35AEVI GOLD, User Manual

Page: 162 / 216

How to operate your unit without the
remote control
In the event that your remote control fails to
work, your unit can be operated manually
with the MANUAL CONTROL button located
on the indoor unit. Note that manual
operation is not a long-term solution, and
that operating the unit with your remote
control is strongly recommended.
BEFORE MANUAL OPERATION
Unit must be turned off before manual
operation.
To operate your unit manually:
1. Press the button on both side of the indoor
unit to loosen the panel, then lift the front
panel up, use the automatic telescopic rod
to prop up the panel.
2. Locate the MANUAL CONTROL button on
the right-hand side of the unit. Press the
recessed button with your finger or the tip
of a ballpoint pen.
3. Press the MANUAL CONTROL button one
time to activate FORCED AUTO mode.
4. Press the MANUAL CONTROL again to
activate FORCED COOLING mode.
5. Press the MANUAL CONTROL button a third
time to turn the unit off.
6. Hold the panel by hand, and press the
middle position of the automatic telescopic
rod to close the front panel.
!
CAUTION
Manual control button
The manual button is intended for testing purposes
and emergency operation only. Please do not use this
function unless the remote is lost and it is absolutely
necessary. To restore regular operation, use the remote
control to activate the unit.
M
a
n
u a
l c
o
n t r
o
l
b
u
t t
o
n
Automatic
telescopic rod
(press the middle
position to
release)
Press here to
loosen the front
panel