Page 32 of 44
™
4 Loc3 Series Transmitters
4. Loc3 Series Transmitters
This section of the manual covers both the 5-watt and 10-watt Loc3 transmitters.
4.1 Loc3 Series Transmitter Overview
The Loc3 series transmitters are rugged portable transmitters powered by alkaline “D” cells or Li-ion rechargeable batteries. The
following describes the features and uses of the transmitter.
1
2
3
4
5
6
1.
Loc3 series transmitter
2.
Ground stake
3.
Direct connection lead
4.
D cell alkaline batteries
5-watt = x 8, 10-watt = x 12
5.
Alkaline battery tray
6.
Mini-USB lead
4.1.1 The Transmitter Display
1
2
5
6
7
8
3
4
8.19
kHz
1
0 2
mA
9
1.
Mode indication icon
2.
High Voltage Warning*
3.
Active frequency
4.
Speaker level
5.
Battery status
6.
Output step bar graph
7.
Digital readout (mA, volts, ohms)
8.
Units (mA, volts, ohms)
9.
Tx-Link Status
Blinking icon = Tx-Link is not paired
Solid icon = Tx-Link is active and linked to the transmitter
*Output Protect Warning
The transmitter checks the line when connected. Output protected against accidental momentary connection to up to 230V
AC (RMS), it will display the high voltage warning icon and not allow the transmitter to operate. In addition, the transmitter is
protected by a 4A/250V fuse in the event of excessive voltage or voltage spikes on the line.
