Page 41 of 44
™
4 Loc3 Series Transmitters
3. An ID number will now be displayed at the bottom of the screen for
identification purposes.
R E C E I V E R L I N K
D I S A B L E
B A C K
8 8 = 6 b = O f = 8 4 = 5 b = b 4
4. The transmitter is now waiting to connect to a receiver.
Either press the “I” button or use the “+” and “-“ keys to highlight “BACK” then
the “F” key to exit back to the main screen.
When on the main screen, a “beacon” icon will be displayed on the right-
hand side. When the icon is flashing, the transmitter is waiting to connect to a
receiver. The flashing will stop when successfully connected to the receiver.
If no icon is visible, this indicates that the Receiver Radio Link has not been
activated.
83.1
kHz
L 2
5. While the icon on the transmitter is flashing, indicating that it is waiting
to connect to a receiver, switch on the vLoc3 series receiver and enter
the user menu by pressing and holding the information button. Scroll
down the menu options until Transmitter Link is highlighted.
Note that the transmitter and receiver sides of the radio links can be
switched on in any order.
Menu
Imperial/Metric
Continuous Information
Auto Power Off
Warnings
Bluetooth Pairing
Transmitter Link
Transmitter Control
Meter
Depth & current
Never
Transmitter Link
Transmitter Link
Disabled
6. Select the “Transmitter Link.” Check that the radio module is enabled. If
not, press the return button to enable the Transmitter Link.
After a short scan, the available devices will be displayed. Highlight the
one to be selected and press the return button. Press the information
button to return to the main menu.
Transmitter Link
Transmitter Link
TX10W
Enabled
Forget
40%
7. The “Beacon” icon on the transmitter should not be flashing anymore at this point. A solid icon indicates that the link has
been established.
8. From the main menu, select the “Transmitter Control” option. (that will
become visible when the two devices are linked)
A screen similar to the below should be seen:
Menu
Imperial/Metric
Continuous Information
Auto Power Off
Warnings
Bluetooth Pairing
Transmitter Link
Transmitter Control
Meter
Depth & current
Never
