Page 39 of 44
™
4 Loc3 Series Transmitters
In Clamp Mode
Volume
Voltage
LCD Contrast
Receiver Link Disabled
Frequency Menu
About
5 and 10-Watt Transmitters
2. The screen will show a list of frequencies available, with the central one in
a box.
Frequency Menu
SD-USA
FF Low X
FF High
5 and 10-Watt Transmitters
3. You can scroll up or down through the available frequencies by pressing the “+” or “-” pushbuttons.
4. Once the wanted frequency is inside the box, press the “f” pushbutton to
select or deselect the frequency. An “x” will appear in the box for a selected
frequency.
Frequency Menu
SD-USA
FF Low X
FF High
5 and 10-Watt Transmitters
5. After selecting the frequencies, press the “i” pushbutton again to exit the “Frequency Menu” and return to the main display.
6. A frequency in the chosen list of frequencies can be selected from the screen by pressing the “f” pushbutton until the
wanted frequency is displayed at the top of the main screen.
4.6.3 Multi-Frequency Mode for Direct Connection
This feature can be used to energize two or three frequencies simultaneously on the target line. This is especially helpful when
the user is unsure which frequency is best to apply to the target line.
NOTE
•
When using the multi-frequency mode, total power will be split between the activated frequencies.
• The multi-frequency mode is not available in Fault Find and SD modes.
• The frequencies have to be available in the main menu.
Enter the Multi-frequency Setup menu:
1. Press the “i” pushbutton seven times to get to the “Multi-Frequency” screen
and press the “f” pushbutton to activate the multi-frequency mode. An “x”
symbol will appear, indicating that the multi-frequency mode is activated.
Press the “f” pushbutton again to go to the “Multi-Frequency. Setup” screen
to choose the frequencies.
Volume
Voltage
Resistance
Multi Frequency
LCD Contrast
Receiver Link Disabled
Frequency Menu
About
