manualshive.com logo in svg

Vivato VA4200, User Manual

The Vivato VA4200 User Manual is available for free download on our website. This comprehensive manual provides step-by-step instructions and all the necessary information to optimize the performance of your Vivato VA4200 product. Easily download it from manualshive.com to get started with your device hassle-free.

Share
Download
background image

Copyright © 2004-2005, Vivato, Inc.

8

Contents

Documentation Updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

About This Document. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

User and Developer Audience  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Online Help Features  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Guidance on Configuring the AP/Bridge with Recommended Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Typographical Conventions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Overview of the Vivato Wi-Fi AP/Bridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Indicators and Connectors  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
What’s Next?  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

PreLaunch Checklist: Default Settings and Supported User/Client Platforms  . . . . . . . . . . 20

Vivato Wi-Fi AP/Bridge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
User’s Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Wireless Client Computers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Understanding Dynamic and Static IP Addressing on the Vivato Wi-Fi AP/Bridge . . . . . . . . . . . . . . . . . . . . . . 25

Quick Steps for Setup and Launch of Your Wireless Network . . . . . . . . . . . . . . . . . . . . . . . 26

Step 1. Install the AP/Bridge  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Step 2. Set the PC’s Network Interface to Talk to the AP/Bridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Step 3. Log in to the VivatoVision Web Pages  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Step 4. Configure the Basic Settings  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Step 5. Specify the IP Address and Security Settings for the Primary Wireless Network . . . . . . . . . . . . . . . . . . 29
Step 6. Configure the Default Gateway and DNS Nameserver IP Addresses  . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Next Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Shipping Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Environmental Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Mounting Weight Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Powering the VA4200  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Positioning The VA4200  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Mounting the VA4200  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Preparing the VA4200 for Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Configuring Basic Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Navigating to Basic Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Review / Describe the AP/Bridge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Specify a New User Password and the Wireless Network Name. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Update Basic Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Global Network Settings  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Navigating to Global Network Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Specifying the Default Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Specifying the DNS Nameservers  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Updating Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Setting Interface IP Addresses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Summary of Contents for VA4200






















































































































































































Reviews:

No comments

Related manuals for VA4200

D-Link DWL-7130AP - xStack - Wireless Access Point Overview preview
DWL-7130AP - xStack - Wireless Access Point
Brand: D-Link Pages: 4
T-Mobile webConnect Jet Getting Started Manual preview
webConnect Jet
Brand: T-Mobile Pages: 8
T-Mobile Franklin T9 Quick Start Manual preview
Franklin T9
Brand: T-Mobile Pages: 3
versa VX-AP310N User Manual preview
VX-AP310N
Brand: versa Pages: 103
US Robotics 8004 - Quick Installation Manual preview
8004 -
Brand: US Robotics Pages: 108
3Com 8760 - Wireless Dual Radio 11a/b/g PoE Access... Datasheet preview
8760 - Wireless Dual Radio 11a/b/g PoE Access...
Brand: 3Com Pages: 8
peplink Pepwave Surf SOHO User Manual preview
Pepwave Surf SOHO
Brand: peplink Pages: 151
YOKOGAWA YFGW520 User Manual preview
YFGW520
Brand: YOKOGAWA Pages: 45
Netis WF-2409B Quick Installation Manual preview
WF-2409B
Brand: Netis Pages: 16
Billion BIPAC 6500W User Manual preview
BIPAC 6500W
Brand: Billion Pages: 61
Linksys WAP11 - Instant Wireless Network Access Point User Manual preview
WAP11 - Instant Wireless Network Access Point
Brand: Linksys Pages: 33
Comcast CGG-F782CTW5 Manual preview
CGG-F782CTW5
Brand: Comcast Pages: 13
EnGenius ECB1200 Quick Installation Manual preview
ECB1200
Brand: EnGenius Pages: 2
HomeMatic 153663 Mounting Instruction And Operating Manual preview
153663
Brand: HomeMatic Pages: 55
EnGenius ECM355AP User Manual preview
ECM355AP
Brand: EnGenius Pages: 20
HPE Aruba AP-318 Product End-Of-Life Disassembly Instructions preview
Aruba AP-318
Brand: HPE Pages: 4
Westermo 23-073001 User Manual preview
23-073001
Brand: Westermo Pages: 28
RFNet AP-2001G User Manual preview
AP-2001G
Brand: RFNet Pages: 22

Brands by name

Popular brands

Load more brands