Copyright © 2004-2005, Vivato, Inc.
30
5. Select the
STATUS>SSID Table
tab, and select the
Configure
link for the primary network name that you
entered. This causes the
SSID Configuration
page for that network to be displayed.
6. Select the type of security to use on the Primary Wireless Network to secure wireless connections, or
leave the setting at "Open" to provide an unsecured network. Be sure to also configure your clients to
work with that type of security. Refer to “Configuring Security” on page 91 for detailed descriptions of
security settings.
7. Select
Update
to save your settings. Wireless clients must use the security configuration for that
network in order to authenticate through it.
Step 6. Configure the Default Gateway and DNS Nameserver IP Addresses
The gateway in your wired network provides access to outside networks, allowing clients to do things like
access the Internet. DNS nameservers convert host names, like "viviato.net", into IP addresses that may
be on local or remote networks. The IP addresses of these devices need to be entered in order for the AP/
Bridge to know where to send these types of network requests.
Select
INTERFACE MANAGEMENT>Global Network Settings
to bring up the default gateway and DNS
