141
Copyright © 2004-2005, Vivato, Inc.
Click
OK
on the Wireless Network Properties dialog to close it and save your changes.
Connecting to the Wireless Network with a WPA-PSK Client
WPA-PSK clients should now be able to associate and authenticate with the AP/Bridge. As a client, you
will not be prompted for a key. The TKIP or AES key you configured on the client security settings is auto-
matically used when you connect.
Network Key
Provide the key you entered on the AP/Bridge Security settings
for the cipher suite you are using.
For example, if the key on the AP/Bridge is set to use a TKIP
key of "012345678", then a TKIP client specify this same string
as the network key.
The key is provided for
me automatically
This box should be disabled automatically based on other set-
tings.
Authentication Tab
Enable IEEE 802.1x
authentication for this
network
Make sure that IEEE 802.1x authentication is disabled
(unchecked).
(Setting the encryption mode to WEP should automatically dis-
able authentication.)
