Vivato VA4200 User Manual Download Page 23 | Manualshive

Page: 23 / 181

background image

23

Copyright © 2004-2005, Vivato, Inc.

Wireless Client Computers

The Vivato Wi-Fi AP/Bridge provides wireless access to any client with a properly configured Wi-Fi client
adapter for the 802.11 mode in which the AP/Bridge is running.

Multiple client operating systems are supported. Clients can be laptops or desktops, personal digital
assistants (PDAs), or any other hand-held, portable or stationary device equipped with a Wi-Fi adapter and
supporting drivers.

Wireless Connection to
the Network

After initial configuration and launch of the first AP/Bridge on your new wireless net-
work, you can make subsequent configuration changes through the VivatoVision
Web pages using a wireless connection to the "Internal" network. For wireless con-
nection to the AP/Bridge, your administration device will need Wi-Fi capability simi-
lar to that of any wireless client:

• Portable or built-in Wi-Fi client adapter that supports one or more of the IEEE

802.11 modes in which you plan to run the AP/Bridge. (IEEE

and

modes are supported.)

• Wireless client software such as Microsoft Windows XP or Funk Odyssey wire-

less client configured to associate with the Vivato Wi-Fi AP/Bridge.

For more details on Wi-Fi client setup, see “Wireless Client Computers” on page 23.

Display Resolution

Higher screen resolutions (such as 1280 x 1024) reduce the amount of scrolling
needed to access all settings on the VivatoVision web user interface.

Web Browser / Operating
System

Configuration and administration of the Vivato Wi-Fi AP/Bridge is provided through
a Web-based user interface hosted on the AP/Bridge. We recommend using one of
the following supported Web browsers to access the AP/Bridge VivatoVision Web
pages:

• Microsoft Internet Explorer version 5.5 or 6.x (with up-to-date patch level for

either major version) on Microsoft Windows XP or Microsoft Windows 2000

• Netscape Mozilla on Redhat Linux version 2.4

The VivatoVision Web browser must have JavaScript enabled to support the inter-
active features of this interface. It must also support HTTPS uploads to use the
firmware upgrade feature.

CD-ROM Drive

The administrator’s computer must have a CD-ROM drive to access the User Guide
on the supplied CD-ROM.

Security Settings

Ensure that security is disabled on the wireless client used to initially configure the
AP/Bridge.

Required Software or
Component

Description

«
...
21
22
23
24
25
...
»

Summary of Contents for VA4200






















































































































































































Reviews:

No comments

Related manuals for VA4200

Brand: IDENTEC SOLUTIONS Pages: 17

Brand: D-Link Pages: 3

Brand: D-Link Pages: 2

Brand: NetComm Pages: 3

RouterBOARD 750

Brand: MikroTik Pages: 2

CarrierGate PCWA-A220

Brand: Sony Pages: 17

Brand: Sony Pages: 32

Brand: Sony Pages: 41

PCWA-A100 - Wireless Lan Access Point

Brand: Sony Pages: 61

Brand: Sony Pages: 65

Brand: Symbol Pages: 100

Brand: Ebyte Pages: 4

Brand: Ebyte Pages: 38

Brand: Xclaim Pages: 4

Brand: Dyness Pages: 16

Brand: 4IPNET Pages: 108

Brand: Sitecom Pages: 43

Wireless 802.11g Multi-mode AP

Brand: Ferimex Pages: 42

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands