22
www.vivaldigroup.it
AUX MONITORING OPTIONS page 2/2. Use << and >> keys to move between the parameters and pages. Use +
and – keys to adjust the selected parameter. Once done, press ENTER to confirm and save the settings.
VOLUME:
value range LAST/0-50. Allows to set the volume level when automatic wakeup is enabled on FRE-
Emk3, FREENETmk3 and FREESOURCEmk3 AUX 1 or AUX 2. If on LAST, FREEmk3, FREENETmk3 and
FREESOURCEmk3 will switch on at the last volume set before switching off. Default value: LAST.
MIC OPTIONS page 1/3. Use << and >> keys to move between the parameters and pages. Use + and – keys to
adjust the selected parameter. Once done, press ENTER to confirm and save the settings.
MICin Vol.:
values from 0 to 50. Set the volume level of MIC IN source FREEmk3, FREENETmk3 and FREE-
SOURCEmk3 is called from another device connected to it. Default value: 10.
IntMIC Alw ON:
if ON the microphone capsule will always be active in any source or status of FREEmk3, FREE-
NETmk3 and FREESOURCEmk3. Default value: OFF.
MIC Line:
on MIC LEVEL, the MIC IN sensitivity is adjusted to microphone level inputs, ideal for multiple con-
nection between FREEmk3, FREENETmk3 and FREESOURCEmk3 in order to use microphone call functionality.
On LINE LEVEL, the input sensitivity of MIC pin will be lowered by 6 dB to match the level of AUX 1 and AUX
2 inputs. This way, MIC pin can be used as a third, optional Mono AUX input. Default value: MIC Level.
MIC OPTIONS page 2/3. Use << and >> keys to move between the parameters and pages. Use + and – keys to
adjust the selected parameter. Once done, press ENTER to confirm and save the settings.
MIC Out Vol.:
sets the output level of MIC OUTPUT source, values from 0 to 50. Default value: 50.
Mix MIC Line:
allows to mix MIC source to any other source at the same time. Default value: OFF.
Chime:
enables the automatic chime tone (Bell). If ON INPUT, the call tone will be played only when the device
receives a call, if ON OUTPUT, the call tone will be played only when the device is making a call. If on BOTH, the
tone will be played both at incoming and outgoing calls. Default value: OFF.
