13
www.vivaldigroup.it
AUXIN 1. FREEmk3,FREENETmk3 and FREESOURCEmk3 feature two stereo line inputs, named AUX1 e AUX2.
At the AUX1 input it is possible to connect any audio source at line level (1 Vrms). Briefly pressing the ENTER key
activates and deactivates the MUTE function (symbol X at the top right near the volume value). Briefly pressing the
MENU key switches to the VU meter display. Press the + and - keys to increase and decrease the listening volume
from a minimum value of 0, which corresponds to MUTE, to a maximum value of 50. Press the MICROPHONE key
to switch to microphone mode (see chapter 6.2.7 and 6.2 .8). The horizontal bar at the bottom indicates the level of
the incoming audio signal (VU meter).
AUXIN 2. FREEmk3,FREENETmk3 and FREESOURCEmk3 feature two stereo line inputs, named AUX1 e AUX2.
At the AUX1 input it is possible to connect any audio source at line level (1 Vrms). Briefly pressing the ENTER key
activates and deactivates the MUTE function (symbol X at the top right near the volume value). Briefly pressing the
MENU key switches to the VU meter display. Press the + and - keys to increase and decrease the listening volume
from a minimum value of 0, which corresponds to MUTE, to a maximum value of 50. Press the MICROPHONE
key to switch to microphone mode (see chapter 6.2.7 and 6.2 .8). The horizontal bar at the bottom indicates the
level of the incoming audio signal.
MIC INPUT source page. It is possible to communicate between more FREEmk3,FREENETmk3 and
FREESOURCEmk3 connected to each other. More specifically, MIC INPUT source allows to listen to the incoming
audio signal on MIC input pin(see Chapter 4.2, section 15). Activating MIC INPUT source in one FREEmk3,
FREENETmk3 or FREESOURCEmk3 and MIC OUTPUT source on another (see Chapter 6.2.8) FREEmk3,
FREENETmk3 or FREESOURCEmk3, activates the monitoring of the zone set on MIC OUTPUT source.
WARNING:
VIVALDI SRL is exempt from any improper use of this function.
6.2.6 AUXIN 1 SOURCE
6.2.7 AUX 2 SOURCE
6.2.8 MIC INPUT SOURCE
