11
www.vivaldigroup.it
1. Scroll through DAB+ services (stations) to reach the desired service;
2. Press and hold << and >> keys together for 2 seconds (“M” followed by the current memory
slot starts flashing);
3. Select the desired memory slot with << and >> keys to reach the memory slot to overwrite;
4. Press ENTER key to confirm and store;
5. To activate the memory scroll mode press MENU key one time (MEMORY SELECTION) and use << and >>
keys to navigate between the memory slots;
6. To switch between FREQUENCY SELECTION and MEMORY SELECTION modes press
MENU key.
WARNING:
each new memory save in one of the 6 slots will overwrite the frequency previously stored.
At the bottom of the screen a VU meter displays the audio signal level. The top bar displays, from left to right, time,
current source and volume level. Briefly pressing the ENTER key activates and deactivates the MUTE function
(symbol X at the top right near the volume value). Briefly pressing the MENU key switches to the VU meter display.
Press the + and - keys to increase and decrease the listening volume from a minimum value of 0, which corre-
sponds to MUTE, to a maximum value of 50. Press the MICROPHONE key to switch to microphone mode (see
chapter 6.2.7 and 6.2.8). The horizontal bar at the bottom indicates the level of the incoming audio signal.
USB source page. It is possible to connect to the USB port only mass storage devices with FAT16 o FAT32 file
system format. Maximum capacity allowed 8 GB. Reading and file playing starts from the first track in memory root,
then in hierarchical order to the first track in the first folder (maximum 65534 folders) and so on. Supported audio
formats: MP3, WMA, AAC.
WARNING:
Vivaldi does not guarantee proper operation with USB drives of higher capacity than 8GB or with diffe-
rent file system than FAT16 or FAT32.
WARNING:
Vivaldi does not guarantee proper operation if the USB drive contains different files and system forma-
ts than those mentioned above.
WARNING:
it is not possible to connect active devices such as smartphones, mp3 readers or mass storage devi-
ces like hard disks. Using the USB port to charge any kind of device will cause bad operation and invalidate war-
ranty.
WARNING:
Vivaldi does not guarantee compatibility with all USB drives available in commerce, even if under the
specifications mentioned above.
When inserting a USB drive in FREEmk2 and FREENETmk2, the device will automatically switch to USB source
mode and start playing tracks from the USB drive. Same happens if the device is in standby. On the display, while
playing, playing time, track title (if available), and playing information will be displayed. With >> or << keys scroll
tracks if the note symbol is displayed, scroll folder if the folder symbol is displayed. Note symbol indicates random
mode for music playing. Briefly pressing the ENTER key activates and deactivates the MUTE function (symbol X
at the top right near the volume value). Briefly pressing the MENU key switches to the VU meter display. Press
the + and - keys to increase and decrease the listening volume from a minimum value of 0, which corresponds to
MUTE, to a maximum value of 50. Press the MICROPHONE key to switch to microphone mode (see chapter 6.2.7
and 6.2 .8). The horizontal bar at the bottom indicates the level of the incoming audio signal.
This page is displayed when trying to switch to USB mode, but no USB drive is connected to the port of FREEmk2
and FREENETmk2.
6.2.4 USB SOURCE
