VIMATY 70
5.6 - « Address » button
On this page you can change the address of the Vimaty70 on the « MediaBus Control » bus.
The group address allows you to define group of Vimatys which will synchronize them together.
The Master device is the one which acknowledges the commands on the « MediaBus Control » bus.
Only one Vimaty can be set to master on one « MediaBus Control » bus.
Two other functions are accessible by this screen :
5.6.1 - Load
parameters
from
CompactFlash
card
These values are defined in the file vimaty.ini are:
➢
the backlight level.
➢
The sleep time.
➢
the state buzzer.
➢
the Vimaty address.
➢
the time for backlight extinction.
5.6.2 - Update firmware
•
During the generation of your application, PC2Maty software update the last OS setting in the
Update repertory. The update file is freely available on our website
www.vity.com.
It can be
more recent than that proposed by PC2Maty.
•
Important
: Only one update file must be present in the Update repertory.
18/33
Summary of Contents for VIMATY 70EIB
