VIMATY 70
5 - PROCEDURES
5.1 - Setup mode
PC2Maty software generates automaticaly the screen to configure Vimaty 70.
To access to the Setup menu on VIMATY 70 desktop and Wall series, you have to press
simultaneously a non-tactile zone of the screen and the first left push-button. For VIMATY GLS
series, you have to press only a non-tactile zone of the screen during 4 seconds.
The following menu appears on the screen:
•
Button "INFRARED LEARNING" allows the learning of the infra-red codes used by your
application.
•
The button "DATE HOURS" allows the setting the Vimaty time.
•
Button "SCREEN" allows the adjustment the backlighting screen, the screen cleaning and the
calibration.
•
Button "BUZZER" activates or deactivates the buzzer.
•
Button "ADDRESS" configures the Vimaty address, and updates certain values of Vimaty.
•
Button "SLEEP MODE" control the time for backlight extinction.
5.2 - « Infrared Learning » button
There are two ways to learn IR codes with the Vimaty70 :Learning with the integrated infra-
red receiver OR Upadte IR code with CompactFlash (generated with IRDump software).
14/33
Summary of Contents for VIMATY 70EIB
