Technical Reference
Manual-XPM3m Revision Date: August 2014
TEMPERATURE PROFILE PLOTTING (PRECISION PROFILING)
Standard, (installed on all ovens)
An option, (NOT installed on all ovens)
Plotting a temperature profile provides a graphic display of temperature relative to time and distance at one or more
points on a test PCB going through the oven. It also determines values of Peak Temperature, Liquidous Time and
Heat/Cool slope. This helps fine tune the system for optimization of individual profile parameters on the PCB.
DISCLAIMER OF LIABILITY AND CONTENT
THE INFORMATION CONTAINED IN THIS MANUAL IS SUBJECT TO CHANGE WITHOUT PRIOR
NOTICE AND IS CORRECT TO THE BEST OF OUR KNOWLEDGE AT THE TIME OF PRINTING.
VITRONICS SOLTEC CORPORATION ASSUMES NO RESPONSIBILITY FOR LOSS OR DAMAGES
RESULTING FROM THE USE OF THIS MANUAL EXCEPT AS EXPLICITLY STATED IN THE VITRONICS
SOLTEC OVEN WARRANTY STATEMENT.
ALL RIGHTS RESERVED. NO PART OF THIS WORK COVERED BY COPYRIGHT HEREON MAY BE
REPRODUCED IN ANY FORM OR BY ANY MEANS - GRAPHIC, ELECTRONIC OR MECHANICAL –
INCLUDING, BUT NOT LIMITED TO: PHOTOCOPYING, RECORDING, TAPING, OR STORAGE IN AN
INFORMATION RETRIEVAL SYSTEM, WITHOUT THE PRIOR WRITTEN PERMISSION OF THE
COPYRIGHT OWNER.
