2
CO2 set
| Instruction
manual
rev-03_May 2022
1
.
Introduction
1.1
.
About this document
This manual contains instructions and safety information for operation, installation, commissioning and maintenance of the
Vitotherm CO
2
set.
This manual is intended for:
•
the owner of the CO
2
set;
•
the worker that operates the CO
2
set;
•
the qualified technician that performs the installation of the CO
2
set;
•
the engineer that is authorized by Vitotherm to perform (re)commissioning, adjustments, troubleshooting,maintenance
and repairs of the CO
2
set.
1.2
.
Symbols and labels
1.2.1
.
Safety warnings
This manual contains safety warnings that may result in injury when ignored. Each safety warning is indicated with a signal
word. The signal word corresponds with the level of risk of the described hazardous situation:
Signal word
Level of risk
If not avoided
6
DANGER!
High
Will result in death or serious injury
6
WARNING!
Medium
Could result in death or serious injury
6
CAUTION!
Low
Could result in moderate or minor injury
Safety warnings given at the start of a section apply to the entire section.
Format example of a safety warning:
6
WARNING!
Contact with live parts can cause electric shocks, burns or even death.
f
Only perform work on electrical equipment if you are an authorised electrician.
f
Before you start working on electrical equipment: Switch off and lock out the power supply
isolator and verify that no voltage is present.
