4
CO2 set
| Instruction
manual
rev-03_May 2022
2
.
Safety
2.1
.
Introduction
Observe the instructions in this manual before you start working with the CO
2
set. If you fail to follow the instructions from
this manual you can put persons, surroundings, the environment and the CO
2
set at risk. Store this manual in an accessible
place near the CO
2
set for future reference.
f
Always comply with the information, such as labels and the type plate, attached directly to the CO
2
set and keep the
information in a legible condition.
f
Always comply with applicable local laws and regulations.
A Vitotherm CO
2
set is used in combination with a Vitotherm Automatic forced draught burner system.
Refer to the instruction manual of the burner system for more information.
The CO
2
set is equipped with several safety components that ensure safe interaction with the machine.
2.2
.
Intended use
The Vitotherm CO
2
set is intended to be used in the following ways:
•
As an electrically powered fan to collect the flue gases from a boiler system.
•
To mix the collected flue gases with clean air to create CO
2
gas with the desired temperature
.
•
To deliver the dosed flue gases to the distribution system of a greenhouse.
•
OPTIONAL – To mix the collected flue gases with clean air to regulate the under pressure in the connected CO
2
collector.
The Vitotherm CO
2
set is intended to be used under the following conditions:
•
The CO
2
set must only be installed, operated, commissioned and maintained according to the instructions in this
manual.
•
The CO
2
set must only be used for an application in compliance with the requirements in the order confirmation.
•
The CO
2
set must only be used under ambient conditions in compliance with the requirements in the order confirmation.
•
The CO
2
set must only be used in compliance with applicable local laws and regulations.
Safe use of the CO
2
set is only guaranteed if it is used as intended.
