Rotating Spit
The rotating spit consists of the shaft (4) and two rotating spit forks (3). The rotating spit is
suitable for grilling large pieces of meat, e.g. chicken, grilled or roast pork. Use the rotisserie
function (18) for even cooking.
Assemble the rotating spit and insert it into the device:
PLEASE NOTE!
The shaft contains two small round notches marking the outermost position
of the locking screws. These must not be attached any further than the outer ends of the shaft
to ensure that smooth operation is possible.
Do not place any pieces that are too large onto
the rotating spit so that it can rotate without any hindrance.
1. Slide one of the rotating spit forks onto the shaft and lock it with the locking screw. The
shaft contains a small round notch for the tip of the locking screw. In the case of smaller
pieces of food, the rotating spit forks can be secured more centrally on the shaft
2. Slide the items you want to grill onto the rotating spit fork.
3. Slide the other rotating spit fork onto the shaft and food and lock it with the locking screw.
4. Insert one end of the shaft into the round holder (11) on the left hand side of the cooking
space (10). Then hang the other end of the shaft into the support (9) on the right hand side of
the cooking space.
5. Check that it fits securely. The rotating spit must not be able to rotate on its own axis when
the device is switched off. If this is not the case, insert the left hand end of the shaft deeper
into the holder.
6. After use, remove the hot rotating spit from the cooking space using the removal tool (5)
(see the (see the
“Removal Tool” section). Always use oven gloves to remove the section).
Always use oven gloves to remove the rotating spit rotating spit forks and take off forks and
take off the grilled items the grilled items
Rotating Basket
In the rotating basket (2), the food is rotated during cooking so that it becomes crispy on all
sides. The rotating basket is particularly suitable for preparing chips or other potato products,
small pieces of vegetables and meat as well as frozen products, e.g. chicken nuggets or
onion rings.
Fill the rotating basket and insert it into the device:
1. 1. Open the flap of the end of rotating basket.
2. 2. Fill the rotating basket no more than ¾ full with food. It should not be too full to ensure that
the food is cooked evenly.
3. 3. Close the flap and ensure that it is closed correctly so that it does not open during use.
8
