Vitek VTD-13FN User Manual Download

Page: 1 / 174

VITEK

ENVI Series

ENVI Series 1.3 & 2.o MegaPixel

Indoor Dome Camera Series

• 1/3” 1.3 & 2.0 Megapixel Progressive Scan CMOS image sensors

• Up to 30fps live view @ 1920x1080p (2.0 MegaPixel Models) / 1280x1024 (1.3

MegaPixel Models)

• 3.8mm Fixed / 2.8-10mm Varifocal Auto Iris Lens options

• 2D-DNR Noise Reduction

• 16:9 (2.0 MegaPixel Models) / 4:3 (1.3 MegaPixel Models) Video format

• Secondary video output for installation & maintenance

• H.264/MJPEG Dual Streaming

• Minimal Latency with up to 16 simultaneous user connections

• Onvif Compliance

• EDGE recording with onboard MicroSD memory card slot (supports up to 32GB

of local storage)

• Optional Wall Mount available

• 12VDC Operation / Optional PoE (Power over Ethernet)

Specifications & installation procedure subject to change without notice.

Visit www.vitekcctv.com for the most current information available.

Summary of Contents for VTD-13FN















































































































































































Search results

Summary of Contents for VTD-13FN

Reviews:

Related manuals for VTD-13FN

Brands by name

Popular brands

Vitek VTD-13FN, User Manual

Search results

Summary of Contents for VTD-13FN

Reviews:

Related manuals for VTD-13FN

Brands by name

Popular brands