Vitek VTC-BM3FP, Manual

Page: 9 / 32

Installtion Instructions
Installation Instructions
• Make sure power is removed before the installation.
• Follow the order for applying power:
Connect the power leads to the camera (observe polarity for DC power) then
plug-in power. This will avoid damage to the camera from power surges and
improper reseting .
Power Supply Connections
Camera can work with either 12VDC or 24VAC, dual voltage power. Primary
and secondary grounds are completely isolated to avoid the possible ground-loop
problems.
※
SDI OUTPUT
(Yellow)
ANALOG OUTPUT
(Black)
POWER
(AC24V/DC12V)
▪ AC(-) :
AC24V/GND
▪ AC(+) :
AC24V/DC12V
AC
(+)
AC
(-)
※
Please use the cable as provided with camera. If camera cable is cut
and re-wired, the transmission distance of video can be reduced.
Especially SDI cable should not be cut because it requires detailed
wiring and affects the transmission distance.
9