8
address” and then enter the static IP address and other parameters.
③
Open the IE browser and enter its WAN IP and http port to access.
3
Temp Measurement & FR Config
3.1 Temperature Measurement Settings
You can configure temperature measurement via the terminal or Web Client. Take the
temperature measurement settings via Web Client for example.
After the network is connected, go to the web client. Click Config
à
Temperature Measurement
to go to the following interface.
1.
Enable
“
Temperature Measurement
”
then select Celsius or Fahrenheit temperature as
needed and then set the high temperature threshold and the low temperature threshold. When
the body temperature measured is higher or lower than the set value, it will trigger alarms.
2.
Set the alarm holding time.
3.
Set the alarm trigger options.
Trigger Alarm Out:
If enabled, the alarm output device will be triggered when detecting an
abnormal temperature.
