27
Set the format, resolution and quality of the image saved on the SD card and the snapshot
interval and quantity and the timing snapshot here.
Snapshot Quantity
: The number you set here is the maximum quantity of snapshots. The actual
quantity of snapshots may be less than this number. Supposing the occurrence time of an alarm
event is less than the time of capturing pictures, the actual quantity of snapshots is less than the
set quantity of snapshots.
Timing Snapshot
: Enable timing snapshot first and then set the snapshot interval and schedule.
The setup steps of schedule are the same as the schedule recording (See
Schedule Recording
).
l
USB disk
This function is only available for the model with USB interface. In this interface, you can view
the state and capacity of the USB flash disk.
6.2 Image Configuration
6.2.1 Display Configuration
Go to Image
à
Display interface as shown below. The image’s brightness, contrast, hue and
saturation etc. for common, day and night mode can be set up separately. The image effect can
be quickly seen by switching the configuration file.
