9
Trigger Audio Alarm
: If enabled, the system will broadcast the current body temperature as
normal or out of range upon detecting a human body. No matter whether the detected body
temperature is normal or not, the corresponding voice prompt will be heard. If this item is
disabled, the detected body temperature status will not be broadcasted.
Trigger SD Snap
: If enabled, the system will capture images detecting an abnormal
temperature and save the images on an SD card.
Trigger SD Recording
: If selected, video will be recorded on an SD card upon detecting an
abnormal temperature.
Trigger Email
: If “Trigger Email” and “Attach Picture” are checked (email address must be
set first in the Email configuration interface), the captured pictures and triggered event will be
sent to those addresses.
Trigger FTP
: If “Trigger FTP” is checked, the captured pictures will be sent to the FTP
server address. Please refer to FTP configuration chapter for more details.
4. Click “Save” to save the settings.
Note: To set temperature measure via the terminal, please tap System Settings
à
Temperature
Measurement.
3.2 People Management
Collect the face picture first before using face match function. You can add the face picture
directly through the terminal. The setting steps are as follows.
①
Select “People Management” in the main menu page to go to the people management page.
②
Tap “+” to enter the “Add User” page.
