35
36
VT-PTZ10T
3.5.4 PANNING RANGE (
MENU
=> SETUP => PANNING RANGE)
When the dome camera is installed near a wall or on a corner, panning range can be
limited by user.
3.5.5 TILT LIMIT (
MENU
=> SETUP => TILT LIMIT)
Turn Tilt Limit OFF to allow the camera to have full range of tilting ability from 0 to 180
degree.
Turn Tilt Limit On to limit the tilting range by up to +15 degree on both ends.
During zoom-out operation the tilting range is increased slightly by additional
+15 degree.
3.5.6 CALIBRATION (
MENU
=> SETUP => CALIBRATION)
RESET ORIGIN : Calibrate the ORIGIN point.
OFFSET ORIGIN : Adjust a small amount of position error from re-
installation.
ACTIVE OFFSET : Apply the adjustment above or not
AUTO CALIBRATION: ON – When position error detected, recover
automatically.
OFF – Disregard the position error.
PAN RANGE SETUP
RIGHT LIMITE : 000.0
LEFT LIMT : 007.2
ENABLE : ON / OFF
SWAP RIGHT LEFT
SAVE AND EXIT
CALIBRATION
RESET ORIGIN
ORIGIN OFFSET : 000.0 , 000.0
ACTIVE OFFSET : DISABLE/ENABLE
AUTO CALIBRATION : OFF
SAVE AND EXIT
Summary of Contents for VT-PTZ10T
Page 4: ...3 VT PTZ10T WARNING AND CAUTION...
Page 41: ...40 VT PTZ10T...
Page 42: ...41 VT PTZ10T...
Page 43: ...42 VT PTZ10T...
