Vitek VT-PTZ10T, Manual

Page: 26 / 44

25 26
VT-PTZ10T
3.1.4 TOUR (or MENU => FUNCTIONS => TOUR, Short Cut: TOUR)
There are 4 programmable Tours. Each Tour consists of up to 8 Preset positions,
Patterns, Scans or other Tours. Using second-level Tours, it can be expanded up to 56
functions in a single Tour. However tours in the second level Tour will be ignored when
called by the first level Tour. This can be best illustrated by the following example:
If
Tour 01
:
Preset 02, Preset 03,Tour 02, Tour 03
Tour 02 : Preset 05, Preset 06, Tour 04 , Preset 05
Tour 03
:
Preset 07, Scan 01
Tour 04 : Preset 08. Preset 05, Scan 01
Tour1 executes as follows:
Preset 02
è
Preset 03
è
Preset 05
è
Preset 06
è
Preset 05
è
Preset 07
è
Pattern 01
è
... (Repeat) --- Tour 04 in Tour 02 will be skipped in Tour 01
Tour 02 executes as follows:
Preset 05
è
Preset 06
è
Preset 08
è
Preset 05
è
Scan 01
è
Preset 05 …
Repeat (Tour 04 is still valid if called directly from Tour 02.)
xxxxx : 16 digits of title for tour label
- - -
: blank preset position
Speed : F-Normal/ M- Medium D.Scan/ S- Slowest
D.Scan
Dwell : 03-99 Sec
PRST : PRESET 1~128
SCAN : SCAN 1~8
TOUR : TOUR 2~4
TOUR 01:xxxxxxxxxxxxxxxx
01/04
FUNC NO S DW TITLE
PRST 002 S 03 ----------------
PTRN 003 S 03 ----------------
TOUR 002 S 03 ----------------
TOUR 003 S 03 ----------------
---- --- - 03 ----------------
---- --- - 03 ----------------
---- --- - 03 ----------------
---- --- - 03 ----------------
PREV NEXT
SAVE AND EXIT