26
VT-PTZ10T
Follow the steps below to program the Tours:
1. Press
MENU
=> FUNCTIONS => TOUR,
Short Cut
: TOUR MENU
to display the
main menu on the monitor.
No.
+
SHFT
+
TOUR
will open directly Tour
No.
2. Choose an empty location of function by moving the
Joystick
up or down.
3. Stored Preset view can be recalled by pressing
Prst
button, the camera will
move to the stored Preset view.
4. To place predefined functions as a Tour, press the function buttons (such as
Tour
,
or
Scan
,
Prst
).
Then select function No. by twisting the Zoom handle. (Programmed function No.
will be scrolled).
To remove functions from the Tour, press the
HOME
or
Off
button, blank position
mark (- - -) will be displayed. You can overwrite the programmed position.
5. Repeat Step 2 through 4 for each desired position. Each title will be displayed on
top of the line.
6. Up to 8 Presets, Tours, Patterns Scans can be selected for a Tour. You can
expand the Tour sequence by calling other programmed tours. Moving the
Joystick
handle to right or left while the cursor is on the top of the line (TOUR
01) to select another page of the Tour menu. (TOUR 01)
8. You can enter a title for the selected Tour by twisting the
Joystick
while the
cursor is on the top of the line (TOUR 01). Rotate the handle clockwise or
counterclockwise to scroll through the alphanumeric characters. Move the handle to
the right or left to select the next or previous digit.
9. Select Save and Exit by moving the
Joystick
to the right. Press
ESC
to exit the
program without saving.
NOTE: All functions should be programmed before being referred to in the tour menu.
Otherwise functions won’t be selectable by item 4 in the procedure.
Summary of Contents for VT-PTZ10T
Page 4: ...3 VT PTZ10T WARNING AND CAUTION...
Page 41: ...40 VT PTZ10T...
Page 42: ...41 VT PTZ10T...
Page 43: ...42 VT PTZ10T...
