Vitek VT-EH Series Instructions Manual Download Page 53

Page: 53 / 81

VT-EH Series DVRs________________________________________________________________________________

SEARCH MODE: PANO

PANO (Thumb nail):

Each Screen shows 3 hour data.

CH1: 0~3 O‘clock

CH2: 3~6 O‘clock

CH8: 21~24 O‘clock

User can select different channels and playback with faster

speed of up to x64.

SEARCH MODE: Multi Playback

PLAY (Multi view):

The default playback mode is of a 16 screen display.

pressing

DISPLAY

or using the

CHANNEL SELECTION

buttons, it is possible to display a single screen or other multi

screen formats in a similar way to the live display mode.

During playback, user can reserve the recorded data that needs to be archived.

Press button at the time the archive is to be started. Then playback is stopped and the menu below will appear.

After inputting ―TAG‖ name,

press

START

Then display is returned to playback.

Press button again to end archiving. Then menu below will appear again.

Summary of Contents for VT-EH Series


















































































Search results

Summary of Contents for VT-EH Series

Reviews:

Vitek VT-EH Series, Instructions Manual, Page: 53 / 81

Search results

Summary of Contents for VT-EH Series

Reviews: