VT-EH Series DVRs________________________________________________________________________________
34
DVRLINK.NET CONFIGURATION
1) Highlight DDNS Server, and change it to DVRLINK.NET
2) Highlight HOST NAME and press enter. The virtual keyboard will appear. Change the Host Name to your desired name
by removing the previous entry--you can do this by repeatedly selecting the
key. (When choosing your host name,
please don
’
t include any spaces or special characters). Once you have entered your desired host name, select OK.
4) Select
“
TEST
”
under DDNS Registration to make sure the name is available.
5) Select ―TEST‖ under DDNS Connection to make sure you have a connection to the server.
6) Select APPLY at the bottom of the screen to apply your changes.
7) Bring up a browser (ex. Internet Explorer), and type:
http://your-ddns-hostname.dvrlink.net:8080
in the address bar.
For example: If your DDNS Host Name was Johndoesdvr, you would type:
http://johndoesdvr.dvrlink.net:8080
NOTE: If you changed the webport, you will need to use that number, NOT 8080.
DYNDNS.ORG CONFIGURATION
Before configuring the DVR to use the dyndns.org server, you must first setup an account. Go to
www.dyndns.com
and
create an account. If you have trouble creating an account, or need assistance please visit
www.dyndns.com/support/
.
Setting up the DVR
1) Highlight DDNS Server and change it to DYNDNS.ORG.
2) Highlight HOST NAME and enter your dyndns hostname.
3) Highlight USERNAME and enter your dyndns username.
4) Highlight PASSWORD and enter your dyndns password.
5) Highlight DDNS REGISTRATION and select TEST.
6) Highlight DDNS CONNECTION and select TEST; T
his will test the DVR‘s connection to the server.
7) Select APPLY at the bottom of the screen.