5
ENGLISH
ATTENTION! Before assembling make sure
that the power plug is not inserted into the
mains socket.
Products should be put into the bowl before
the unit is switched on.
–
Insert the whisk (7) into the gear (6).
–
Set the gear (6) on the motor unit (2). Then
turn the motor unit so that the marks
▲
are
opposite to each other.
–
Insert the power plug into the mains
socket.
–
Put the whisk (7) into the bowl with products.
–
Set the required operation speed using
the control knob (5). To switch the unit
on, press and hold the button (4)
. Use
this operation mode for mixing liquid prod-
ucts.
–
If you press and hold the button (3) «T»,
the unit will operate at the maximum rota-
tion speed.
–
After using the unit take the power plug out
of the socket. Remove the whisk from the
motor unit.
USING THE CHOPPING KNIFE (9)
The chopping knife is used to chop meat,
onion, herbs, garlic, vegetables and fruits.
Attention! Do not chop very hard products,
such as nutmegs, coffee beans, cereals
and ice.
Note: The volume of the products to
process should not exceed 500 ml.
Before you start chopping
•
Remove bones, sinews and cartilage from
meat.
•
Cut meat, onion, garlic, carrots etc. into
approximately equal slices.
•
When chopping greens, remove stems of
herbs.
Assembling and chopping
WARNING: Before assembling make sure
that the power plug is not inserted into the
socket.
ATTENTION! Strictly follow the described
sequence of operations.
Caution! The chopping knife (9) is very
sharp! Always hold the knife (9) only by the
upper plastic end.
•
Set the chopping knife (9) on the axis (11).
•
Put the products into the bowl (10).
•
Set the lid (8) on the bowl (10) matching the
lid grooves with the ledges in the bowl.
–
Install the motor unit (2) on the lid (8).
Then turn the motor unit so that the
marks
▲
are opposite to each other.
•
Set the required operation speed using the
control knob (5). To switch the unit on, press
and hold down the button (4)
or (3) «Т».
•
During the unit operation hold the motor
unit (2) with one hand and the bowl (10) with
the other.
•
After using the unit detach the motor unit.
•
Remove the lid (8).
•
Take the chopping knife (9) by the plastic
end and take it carefully out of the bowl.
•
Take the chopped products out of the chop-
per bowl (10).
CLEANING
Attention! The blades of the chopping knife
(9) are very sharp and dangerous. Handle
the knife very carefully!
•
Unplug the unit before cleaning.
•
Remove the attachments.
•
Use a slightly damp cloth to clean the motor
unit (2) and the gears (6, 8), then wipe them
dry.
•
After processing of salty or sour products it
is necessary to rinse the chopper knife (9)
and the blender attachment (1) with water
right after the use.
•
While possessing products with strong dye-
ing properties (for instance, carrot or beet-
root), the attachments or the bowls can get
colored; wipe them with a cloth dampened
in vegetable oil.
•
Wash the attachments, the bowl, the geared
lid and the measuring cup in warm soapy
water, rinse and dry them.
DO NOT IMMERSE THE MOTOR UNIT
(2) AND THE GEARS (6 and 8) INTO ANY
LIQUIDS, DO NOT WASH THEM UNDER
WATER JET OR IN A DISHWASHING
MACHINE.
STORAGE
•
Clean and dry the unit thoroughly before
taking it away for long storage.
•
Do not wind the power cord around the
motor unit.
•
Keep the blender set away from children in
a dry cool place.
VT-3409.indd 5
18.08.2014 10:25:25
Summary of Contents for VT-3409 BK
