Vitek VT-3403, Manual Instruction, Page: 6 / 32

6
ENGLISH
• Install the motor unit (3) on the geared lid (9)
feeding chute, turn it counterclockwise until
bumping, make sure that the motor unit (3)
is fixed properly.
• Install the motor unit (3) strictly in the verti-
cal position and evenly.
– To connect the unit to the mains, insert the
power cord plug into the mains socket.
– To switch the unit on, press and hold down
the button (4 or 5).
– If you press and hold down the «II» button
(5), the chopping knife (8) will rotate at max-
imum rotation speed.
– During the unit operation hold the motor unit
(3) with one hand and the chopper bowl (7)
with the other hand.
– After using the unit, wait until the chopping
knife (8) fully stops.
– Remove the power cord from the mains
socket.
– Disconnect the motor unit (3) from the
geared lid (9) chute by turning it clock-
wise.
– Remove the geared lid (9).
– Carefully detach the chopping knife (8) tak-
ing it by the plastic end.
– Take the chopped food out of the chopper
bowl (7).
ATTENTION!
Strictly follow the described sequence of oper-
ations.
To achieve the best results, refer to the table below:
Function Product type Maximum weight
Approximate processing time,
seconds
Chopping (chopper) meat 150 g 10
Chopping and mixing
(Blender)
water 240 g (carrot)
360 g (water)
60
Beating (Whisk) Egg whites 90
Notes: - all data in this table are given as recommendations.
CLEANING
Attention! The blades of the chopping knife (8)
are very sharp and may be dangerous. Handle
the chopping knife (8) very carefully!
1. Unplug the unit before cleaning.
2. Remove the attachments. Use a slightly damp
cloth to clean the motor unit (3) and the reduc-
tion gears (9, 10), then wipe them dry.
3. After processing salty or sour products, it is
necessary to rinse the blender attachment
(1) or the chopping knife (8) with water imme-
diately.
4. While possessing products with strong dyeing
properties (for instance, carrot or beetroot)
the attachments and bowls can get colored,
wipe the attachments and the bowls with a
cloth dampened in vegetable oil; after that
wash the attachments and bowls with a neutral
detergent.
5. Wash the attachments that contacted prod-
ucts with warm water and a neutral detergent
and dry them thoroughly after use. Wash the
whisk attachment (11) all over and wash only
the lower part of the blender attachment (1).
6. Do not immerse the motor unit (3) and the
gears (9, 10) into any liquids, do not wash
them under water jet or in a dishwashing
machine.
STORAGE
• Clean and dry the unit thoroughly before
taking it away for long storage.
• Do not wind the power cord around the
motor unit (3).
• Keep the blender set away from children in
a dry cool place.
DELIVERY SET
Motor unit – 1 pc.
Blender attachment – 1 pc.
Whisk gear – 1 pc.
Whisk attachment – 1 pc.
Geared lid – 1 pc.
Chopping knife – 1 pc.
Chopper bowl – 1 pc.
Measuring cup – 1 pc.
Manual – 1 pc.
Warranty certificate – 1 pc.