Vitek VT-3402 PR, Manual Instruction, Page: 4 / 32

4
ENGLISH
ence or knowledge. Such persons can use this
unit only if they are under supervision of a per-
son who is responsible for their safety and if they
are given all the necessary and understandable
instructions concerning the safe usage of the
unit and information about danger that can be
caused by its improper usage.
•
To avoid risk of electric shock or fire, do not
immerse the unit, the power cord and the power
plug of the unit into water or any other liquids. If
the unit is dropped into water:
–
do not touch the water;
–
unplug the unit immediately, only after that
you may take the unit out of water;
–
apply to an authorized service center for
testing or repairing the unit.
•
Do not try to repair the unit by yourself. If the
unit malfunctions, apply to an authorized ser-
vice center.
•
To avoid damages, transport the unit in original
package only.
• Keep the unit in a dry cool place out of reach of
children and disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USAGE
ONLY
BEFORE USING THE UNIT
After unit transportation or storage under win-
ter (cold) conditions, it is necessary to keep
it for at least two hours at room temperature
before switching on.
• Wash the attachments that will contact products
with warm water and a neutral detergent and dry
them thoroughly before use.
• Clean the motor unit (3), the geared lid (13), the
whisk gear (8) and the mash making attachment
(9) with a soft slightly damp cloth and then wipe
them dry.
Attention!
• The cutting edges of the chopper’s knife
(12) and of the blender attachment (1) are
very sharp and dangerous. Handle these
attachments very carefully!
• Do not immerse the motor unit (3), the whisk
gear (8), the mash making attachment (9),
the geared lid (13), the power cord and the
power plug into water or any other liquids.
• Do not put the attachments and bowls in a
dishwashing machine.
Continuous operation time
• Continuous operation time while working with
the blender attachment and the whisk should
not exceed 1 minute , continuous operation time
with the chopper and the mash making attach-
ment should not exceed
15-20 seconds.
•
Make at least a 3 -minute break between opera-
tion cycles.
USING THE BLENDER ATTACHMENT
WARNING: Before assembling and installing
attachments, make sure that the power plug is
not inserted into the mains socket.
•
Attach the blender attachment (1) to the motor
unit (3), a click of the locks (2) shows that the
attachment is set properly.
•
Insert the power plug into the mains socket.
•
Immerse the blender attachment (1) into the
bowl with products that you want to chop/mix;
you can use the measuring cup (10) for it.
•
To switch the unit on, press and hold the but-
ton (5). Set the required rotation speed of the
blender attachment (1) using the control knob
(6). Use this operation mode for mixing liquid
products.
• If you press and hold the turbo mode button (4),
the unit will operate at maximum rotation speed.
Use this operation mode for combined process-
ing of liquid and hard products.
Notes
–
Products should be put into the bowl before the
unit is switched on.
–
The amount of processed products should not
exceed 2/3 of the capacity of the bowl in which
they are processed.
–
Before starting to chop/mix, we recommend
to peel fruit, remove inedible parts, such as
stones, and cut fruit into cubes approximately
2х2 cm in size.
• After you finish using the unit, take the power
plug out of the mains socket and remove the
blender attachment (1), pressing the locks (2).
Attention!
–
Do not remove the blender attachment (1)
during operation.
–
To avoid damaging the blades, do not pro-
cess too hard products such as cereals,
rice, spices, coffee beans, hard cheeses
and frozen products.
–
When you use the blender attachment and
the products are hard to chop, add some
water, liquor or juice, if it is possible.
USING THE WHISK
Use the whisk attachment (7) only to beat cream,
make biscuit dough or for mixing ready desserts.
VT-3402.indd 4 07.03.2014 15:07:29