Vitek VT-1320, Manual Instruction

Page: 4 / 24

4
ENGLISH
THIS UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY. ITS COMMERCIAL USAGE AND USAGE IN
PRODUCTION AREAS AND WORK SPACES IS PRO-
HIBITED.
USING THE HAIRDRYER
After unit transportation or storage at low tem-
perature it is necessary to keep it for at least
three hours at room temperature before switch-
ing on.
•
Unpack the unit and remove any advertising stick-
ers that can prevent the unit operation. Unwind
the power cord completely.
• Before switching the unit on, make sure that your
home mains voltage corresponds to the unit oper-
ating voltage.
•
Insert the power plug into the mains socket.
Switching hair dryer on
Before switching the appliance on make sure power
supply voltage meets operating voltage of the appli-
ance.
• Unwind the power cord to its full length.
• Insert power cord plug into wall outlet.
• Select operating speed you need using airflow
speed switch (1):
0 = the hairdryer is switched off;
= low speed;
= high speed;
• Select airflow temperature you need using heating
degree switch (2).
= slight heating cold air
= medium heating
= maximal heating
= Cool shot function, press and hold the cool
shot button for fixing your hairstyle.
Taking care about your hair
Before drying and setting your hair, wash them with
shampoo, dry with towel to remove excessive mois-
ture and brush for better results.
Fast drying
Set switch (2) into position of maximal heating (posi-
tion ), select airflow speed you need using switch
(1) and dry your hair out a little bit. Shake off exces-
sive moisture by hand or using a brush and continu-
ously move the hair dryer over your hair.
Straightening your hair
Set switch (2) into position of maximal heating (posi-
tion ), select airflow speed you need using switch
(1) and dry your hair out a little bit. When your hair are
almost dry, install concentrating nozzle (4), reduce
degree of air heating by switch (2) and airflow speed
by switch (1).
Divide your hair into locks and layers and start
straightening from the lower layers. Using a flat or
a round hairbrush, brush the hair downwards while
directing hot air from the nozzle (4) at it. In this way,
slowly straighten each lock from root to end. After
you finish straightening the locks of the lower hair
layer, start straightening the locks of the middle layer
and finish with the locks of the upper hair layer.
Natural waving structure of your hair
Set switch (2) into position of slight heating (posi-
tion ), then set switch (1) into position , hold a lock
between your fingers tightly, turn it to direction of its
natural curliness, then dry the lock out by directing air
jet between the fingers. After getting the shape you
need, press cool shot button (2) and fix each lock.
Volume styling
Using hair dryer in any mode of heating/any speed
from slight to maximal, dry out hair roots beginning
from backside of your head.
Styling your hair
Set switches (1,2) into positions of slight heating and
slow speed correspondingly, attach concentrating
nozzle (4) to provide directed airflow.
Divide your hair into locks and create a required hair
style using a round hairbrush. During hair styling di-
rect the air flow straight onto your hair in the desired
direction.
If necessary, direct air jet on each lock for 2-5 seconds
to fix it. Time of setting locks you should determine on
your own taking into account type of your hair.
«Cool shot»
This model is equipped with function of “cool shot”,
which can be used for fixing your hairstyle. Press
and hold “cool shot” button (3) . This option helps
to protect the hairstyle you have created.
Diffuser
The air flow diffused by the diffuser (7) enables soft
drying and adds volume to your hair. Special «fin-
gers» volumize your hairstyle by directing the air flow
right to the hair roots.
PROTECTION AGAINST OVERHEATING
The appliance is equipped with function of protec-
tion against overheating. This function switches the
appliance off if temperature of outgoing air is higher
then admitted. If hair dryer is switched off during op-
eration, turn it off by setting switch (1) into position
“0”, take power cord plug out of wall outlet, examine
if air inlet or outlet openings are blocked, leave the
appliance for a while for cooling down for 5-10 min-
utes, then switch it on again.