Installation Instructions - VTC-CB4MX39
Power Supply Connections
Using OSD Controller
The Camera can work with either AC24V or DC12V, dual voltage power.
Primary and secondary grounds are completely isolated to avoid a
possible ground-loop problem.
1) SET ( ) : Access to the menu or enter the setting.
To enter the main menu, press the Set Key down.
2) UP/DOWN (
) : Choose the desired sub-menu and move the
cursor up or down.
3) LEFT/RIGHT (
: Set up the value of the selected menu. Used to
adjust the desired menu selection and to move the cursor left or right.
Description of the OSD control operation
4) ‘
’
denotes pressing straight down for 2 seconds
Setup menu can be accessed and controlled by OSD control joystick
on the rear of the camera unit. Five commands are available
with the joystick.
i
HD-SDI or EX-SDI is selectable by Video format switch only.
TVI mode or AHD mode is selectable in the menu only.
(SYSTEM> ANALOG MODE)
OSD Control Joy Stick
Video format Switch
EX-SDI
HD-SDI
HD-ANALOG
CONTROL
POWER
Description of the Auto Focus Zoom, Motorized ZOOM&FOCUS adjustment
1) : Zoom In
2)
3) : Focus Near
4)
(*) Works only when OSD Menu is inactive.
7
Summary of Contents for VIRTUOSO VTC-CB4MZ39
Page 42: ...NOTES 42...