Installation Instructions - VTC-IR4MZ39
1. Locate the mounting template at the installation position and drill the ceiling or
wall if needed. ( *The easy bracket can not be installed on the ceiling)
2. Place the easy bracket on pre-drilled position and attach it through using mounting
screws (
.16 x 1.18” / 4 x 30mm)
. Skip this step when an easy bracket is not installed.
3. Route the Power cable to the connecting place.
Hook up the camera bracket with the easy bracket as illustrated below.
4. Attach the camera bracket through using assembly screws (.16 x .59” / 4x15mm).
5. Set the camera’s viewing angle.
6. Put the sunshield on the camera unit and tighten the sunshield-bolts.
Mounting Screw
:
.16 x 1.18” (4 x 30mm)
Plastic Anchor
:
.24 x 1.18” (6 x 30mm)
1
2
Torque Wrench
REAR VIEW
3
Cable exit
4
Assembly Screw
:
.16 x .55” (4 x 14mm)
18
19
Summary of Contents for VIRTUOSO VTC-CB4MZ39
Page 42: ...NOTES 42...
