SAGA “ST-H” Series
90
To exit this ADVANCED SETUP menu, press the ESC button
7.5.7.1
PASSWORD CHECK
At the ADVANCED SETUP menu,
Move the cursor to the PASSWORD CHECK using the
buttons.
Select ON or OFF using the
button or (+) and (-) from the remote or Front Panel. If
you select OFF, password menu won’t work.
7.5.7.2 SET PASSWORD
At the ADVANCED SETUP menu,
Move the cursor to the SET PASSWORD using the
buttons.
Press the ENTER button when the cursor is on the SET PASSWORD the following screen
will appear.
Select the administrator or user1~4 to change the password and then press “ENTER”
button and you can see the following screen.
Insert your desired password in the eight digits marked _ _ _ _ _ _ _ _ besides NEW
PASSWORD using the CAMERA/ NUMBER INPUT buttons.
And then reinsert 8 numbers of the NEW PASSWORD in the eight digits marked _ _ _ _ _
_ _ _ beside RE-TYPE using the CAMERA/ NUMBER INPUT buttons to verify the
password.
To exit this menu, press the ESC button.
NOTE:
You can use only 0~9 number buttons to setup the PASSWORD.
The default of ADMIN is 11111111, USER1 is 22222222, USER2 is
33333333, USER3 is 44444444, USER4 is 11112222.
If you forget the admin password, please contact the authorized dealer.
CAUTION: Change the password after purchasing for a security.
NOTE
: In case that the PASSWORD CHECK is ON, only ADMIN and MASTER can enter the
ADVANCED SETUP MENU.
