Vitek SAGA ST-H Manual Download Page 148

Page: 148 / 156

SAGA “ST-H” Series

147

a. Record Program: 0 to 9.

b. Event Record Type: single / complex,

event channel only / all channels.

c. Image Size: select the recording

image size.

d. Normal Record: select the recording

rate for manual recording.

e. Event Record: select the recording

rate.

f. Quality Normal: select the image

quality for manual recording.

g. Quality Event: select the image

quality for event recording.

h. Pre Record Time: select the pre-event recording time.

i. Post Record Time: select the post-event recording time.

j. Event Alarm / Video Loss / Motion: check / uncheck event recording

options.

8.6.3.3 Holiday

a. Holiday Record: on / off.

b. Holiday Setup: enter the holidays.

8.6.4 EVENT

8.6.4.1 Event

a. Event Check: on / off.

b. Event Screen Mode: screen hold, event

full, event multi, event full return, event

multi return.

c. Event Message: on / off.

d. Event Message Reset: 1 to 30

seconds.

e. Event Buzzer: on / off.

Summary of Contents for SAGA ST-H





























































































































































Search results

Summary of Contents for SAGA ST-H

Reviews:

Related manuals for SAGA ST-H

Brands by name

Popular brands

Vitek SAGA ST-H, Manual

Search results

Summary of Contents for SAGA ST-H

Reviews:

Related manuals for SAGA ST-H

Brands by name

Popular brands