MANUAL (T RA NSL A TION)
RAY- LG 35X X
Page 14
RAY-LG 35XX
Version: 1.0
Important:
Whenever a parameter is changed, the system must be restarted. If a problem persists, please
contact your local FRABA VITECTOR representative. Visit
www.vitector.eu
for contact data.
Maintenance
Although the RAY-LG does not need regular maintenance, a periodic functional check is strongly
recommended:
▪
Make sure the optical elements are clear of dirt and dust. If necessary, clean the front surface with a
soft towel.
▪
Make sure the profiles are securely fastened.
▪
Check the mounting position, cable routing, and connection of the sensor.
Disposal
Disposal should be done using the most up-to-date recycling technology according to local regulations and
laws. There are no harmful materials used in the design and manufacture of the sensor. Traces of such
dangerous materials may be found in the electronic components but not in quantities that are harmful.
NOTICE:
Damage to the optical elements
▪
Never use any solvents, cleaners or mechanically abrasive towels or high-pressure water to clean
the sensor
▪
Avoid scratching the optical elements while cleaning
