CONFIDENTIAL
– This document is property of VITEC MULTIMEDIA, and may not be used or diffused to a third party without prior written approval.
LW Player User Guide v2.6
page 66 / 70
OFF, only PLAY and STOP commands are available from RS-422 controller.
To enable the other control commands, “Enable trick mode” must be set to « ON ».
Note: To rebuild the index file, change the Index Loading Mode.
2.
Resource Usage Ratio
: Change this parameter to optimize the processing speed of the RS-
422 commands.
3.
Commands:
The following commands are available both on VTR Tab and in LiveWire Setting Page.
Play.
To start VGA monitoring after start playing need to close LiveWire Setting Page and Press
“Enable” button in Preview Group of the main window of the PlayerLW. Open LiveWire
Setting Page to execute a following command.
Pause
Stop.
Always use Stop command before closing application or changing file’s ordering in playlist.
Fast Forward.
Set the number parameter before:
1: forward with playing speed,
more than 1: set speed of fast forward,
less that -1: set speed of slow forward.
Rewind.
Set the number parameter before:
1: rewind with playing speed,
more than 1: set speed of rewind,
less that -1: set speed of slow rewind.
Next Frame.
Set the number parameter before:
1 to unlimited.
Previous frame.
Set the number parameter before:
1 to unlimited.
Previous I frame
Set the number parameter before:
1 to unlimited.
Slow Motion
Set the number parameter before:
1 to unlimited.
Go To Picture
Set the number parameter before:
0 to unlimited. First frame = 0
Go To Timecode
Set the time in TimeCode parameter section before.
