CONFIDENTIAL
– This document is property of VITEC MULTIMEDIA, and may not be used or diffused to a third party without prior written approval.
LW Player User Guide v2.6
page 64 / 70
To retrieve the Analog Audio, use the BNC connectors (Left out, Right out) or J3 pins on the
board (Audio Out).
The Default value (255) provides audio without volume modification.
Lock Tracks:
When ON the value of both channels (L/R) is linked. If Volume Left is
modified then Volume Right is modified too automatically.
Mute Output:
Mute the Analog Audio output.
Left/Right output audio channel:
Use these parameters to route the audio inputs to the Analog Audio Output.
32x2 audio matrix is available to set any input channel to the Analog Audio Output.
Every Audio Input Channel from Decoder or from SDI-Input can be routed to Analog Audio
Output.
-
Click right button on the desired channel and select
Default
to set the default value of
Audio Input Channel, The Default value provides audio without volume modification.
-
Click right button on the desired channel and select
Hidden
to hide the Audio Input
Channel, then fold/expand “Output Audio Channel ##”.
Once hide, it is possible to show the channel through the
LW Setting Page/View/Show
Hidden
or press
Alt+S
.
-
Click right button to lock the value of the parameter right click on the desired channel and
select
Read Only
.
Genlock
Clock Reference:
Available modes:
-
Software controlled
: The application controls the clock via a gain controller.
-
TCXO:
HDM850 uses temperature compensated clock.
-
Genlock Input
: HDM850 uses an external genlock to generate V-sync, H-sync and Black
Burst. The board needs to be locked using the Genlock IN (BNC) for the SD/HD resolutions.
Do not use this input for genlocking 3G signal (1080p50;p59,94;p60), (see below).
-
SDI Input:
Same as Genlock input.
In this case, the Genlock input source is the HD-SDI Input. This mode can be used for any
resolution from SD/HD to 3G.
HD Channel Offset (ns):
Set offset with the system clock reference used on the Primary HD
Channel.
SD Channel Offset (ns):
Set offset with the system clock reference used on the Secondary
SD Channel.
