CONFIDENTIAL
– This document is property of VITEC MULTIMEDIA, and may not be used or diffused to a third party without prior written approval.
LW Player User Guide v2.6
page 60 / 70
-
Click right button to lock the value of the parameter right click on the desired channel and
select
Read Only
.
DCA
(Digital Control Amplifier): This parameter modifies the value of the group of Input
Channels.
Primary|Secondary Channel – Component Output
Channel
:
-
HD-Primary channel: In this case, Component Output is routed on the Primary HD-SDI
channel. The HDMI video resolution/frame rates remains identical to the Primary HD-SDI
Channel Output (please refer to the diagram on page 4).
-
SD-Secondary channel: In this case, Component Output is routed on the Secondary SD-
SDI channel. The HDMI video resolution/frame rates remains identical to the Secondary
SD-SDI Channel Output
Analog Output Chroma Type
:
-
YPbPr: This mode is used to transmit video in YPbPr Chroma type.
Use three BNC connectors (Pr/R, Pb/B, Y/G) to plug a monitor to the board.
-
CVBS_YC: This mode is used to transmit video in Y/C Chroma type.
Connect to the Y/G BNC connector to plug a monitor to the board.
-
RGB: This mode is used to transmit video in RGB Chroma type.
Connect to the three BNC connectors (Pr/R, Pb/B, Y/G) to plug a monitor to the board.
Chroma Phase (degrees)
:
Default value: 195
This parameter sets chroma phase of color burst signal for the composite/S-Video (in degrees
from 0 to 360 degrees).
Burst Lock Phase:
Default value: 100
This parameter sets the location of the chroma burst for the analog outputs relative to
horizontal synch rising edge.
