7
25
1 Shake
Ramps up to MED (50%), decreases to LOW (25%),
then gradually decreases to LOW (15%)
:20
26
2 Shake
Ramps up to MED (50%), decreases to LOW (25%),
then gradually decreases to LOW (17%)
:30
27
3 Shake
Ramps to HIGH (100%), decreases to LOW (25%),
then decreases to LOW (15%)
:20
28
Ice Cream Drink
Ramps up to MED-LOW (35%), then ramps to
MED-HIGH (75%)
:15
29
Small Shake
Ramps up to MED (58%), then decreases to
LOW (25%)
:10
30
Hard-to-Blend Shake
Ramps up to MED-HIGH (80%), decreases to MED
(51%), then gradually increases to HIGH (100%)
:25
31
General Programme 1
Ramps up to HIGH (100%)
:25
32
General Programme 2
Slowly ramps up to HIGH (100%)
:45
33
General Programme 3
Quickly ramps up to MED (40%), decreases to LOW
(15%), then up to HIGH (90%)
:24
34
General Programme 4
Quickly ramps up to MED (45%), then gradually
increases to MED-HIGH (75%)
:35
DRINK TYPE
No.
DESCRIPTION
RUNNING
TIME
M
AC H I N E
A
S S E M B LY
FIGURE A
Compact Cover
Cover Door:
1.
The cover door can be removed by opening it until the door is horizontal.
Then, gently spread the sides of the door over the round hinges and
remove.
2.
To reinstall the cover door, gently spread the sides of the door and place the
door hinge cut-outs over the round hinges.
Back Cover:
For enhanced sound reduction, the sound enclosure for The Quiet One®
is secured to the base using a patented magnetic system. Aside from the
advantages of reducing blending noise over that of mechanically attached door
systems, the magnetically attached system allows for fast and easy removal for
cleaning.
To remove the sound enclosure:
• First ensure that the container has been removed from the unit.
• Grasp the enclosure with both hands.
• Tilt slightly back and pull the enclosure straight up (See Figure B).
To replace the sound enclosure:
• Start with the back cover detached from the cover door
• Align the opening in the base plate of the back cover (See Figure C)
• Start on one side of the centring pad and slowly lay the back cover into
position ensuring that the sound dampening pad is not pinched by any
portion of the base plate (Figure D).
FIGURE B
FIGURE C
FIGURE D
Two-Piece Lid
(Figure A)
1.4-litre Advance® Container
The two-piece lid is easy to clean and easy to put on, take of and seal.
• To remove a fully latched lid, lift the two tabs and pull upwards and of.
• Twist the centre lid plug to fasten or remove.
One-Piece Lid
(Figure B)
1.4-litre Advance® Container
The one-piece lid is easy to clean and easy to put on, take of and seal.
• There is no lid plug for this lid.
• Ingredients can be added through a port on top.
To secure the lid plug,
rotate it so one tab locks
between the notches on
the top of the rubber lid
FIGURE A
IMPORTANT NOTES!
Containers:
• The Quiet One® machines are optimised for use with the Vitamix® 1.4-litre
Advance® container (3 sided container). The 2.0-litre standard container
will not it in the compact cover used on The Quiet One®. Contact Vitamix
Customer Services on +1 800 886 5235 or contact your distributor for
more information.
• Outside the United States and Canada, your machine may come with a
diferent container coniguration.
Blade Assembly
Blade Agitator Assembly:
The blade assembly includes a precision-hardened
stainless steel blade with enclosed double-sealed steel ball bearings for
maximum durability. The rugged blade assembly literally explodes molecules
of food and ice in the container, helping every batch to homogenise more
efectively. The blades do not need to be removed for normal cleaning.
Drive Spline:
Inserts into the drive socket on the motor base to turn the blade.
Note:
Removing and replacing your container while the coupling is still rotating
will strip the drive spline ‘teeth’.
(This part is NOT removable.)
Retainer Nut:
Must be snug.
FIGURE B
