manualshive.com logo in svg

vita Easyshade, Operating Manual, Page: 5 / 46

Share
Download
vita Easyshade Operating Manual Download Page 5

V I T A   E a s y s h a d e 

4 

  

  

 

Touching the Next (“

►

”) or Previous (“

◄

”) indicators causes the display to scroll through “Tooth single” (the 

measurement of the base shade of a tooth), “Tooth areas” (the measurement of the cervical, middle and incisal 
areas of a tooth), or “Restoration” (verification of the accuracy of a restoration).  The factory default mode of 
operation is “Tooth single”. 

 

Touching the Next (“

►

”) or Previous indicators in the second bar causes the display to scroll through "Normal 

Mode Only (displays the results of a single measurement of a tooth) "Standard/Average" (displays the result of 

the a single measurement of a tooth or the average of several measurements).  The factory default mode is 
"Normal Mode Only".  

 

Touching the Next  (“

►

”) or Previous indicators in the third bar causes the display to scroll through "3D & 

Classical" (displays the result of a single measurement of a tooth in VITA 3D-Master or VITA Classical shades) 
and "3D-Master only" (only 3D-Master shades). The factory default mode is "3D-Master only".  

 

Touching “Back” causes the volume/brightness adjustment screen to be displayed.  Touching “Exit & Save” 
causes the changes to the settings (if any) to be saved

. 

Touching "Next" causes the following screen to be 

displayed:   

 

 

 

  

  

 
Touching the Next (“

►

”) or Previous indicators in the upper bar (“

◄

”) causes the screen to scroll through 

"Translucency On" (indicates the translucency in the middle third of the tooth compared to an equivalent shade 
sample) or "Translucency Off". The factory default mode is "Translucency On".   

 

 

Touching the Next (“

►

”) or Previous (“

◄

”) indicators in the third bar causes the screen to scroll through "Show 

LCH OFF" (do not display detailed color information for a measurement) and "Show LCH ON" (for displaying the 
results of a measurement as L (lightness), C (chroma) and H (hue)). The factory default mode is "Show LCH 
OFF".  

Summary of Contents for Easyshade















































Reviews:

No comments