manualshive.com logo in svg

vita Easyshade, Operating Manual, Page: 2 / 46

Share
Download
vita Easyshade Operating Manual Download Page 2

V I T A   E a s y s h a d e 

1 

Table of Contents

 

 

1.  Getting started  ................................................................................................................................. 2  

  1.1 Installation of the unit.....................................................................................................................2 
 1.2 

Power-up 

..................................................................................................................................... 2  

  1.3 Selecting Power-on defaults  ........................................................................................................ 3  

  1.4 Applying an Infection Control Shield ............................................................................................ 6  
 

2.  Calibrating Easyshade  .................................................................................................................... 9  
 

3.  Measuring a tooth .......................................................................................................................... 12 

  3.1 Measuring the base shade of a tooth  ........................................................................................ 12 
  3.1.1 Normal measurement mode  ................................................................................................... 13 
  3.1.2 Measurement averaging mode  ............................................................................................... 15 

  3.2 Measuring tooth areas  ............................................................................................................... 16 
 

4.  Verifying the shade accuracy of a restoration  ............................................................................ 18 
 

5.  Measuring a shade tab  ................................................................................................................. 22 
 
6. Operating in extended mode .......................................................................................................... 23 

  6.1 Extended color information for a tooth  ....................................................................................... 23 

  6.2 Extended color information for a restoration  .............................................................................. 28 
 

7.  Care and maintenance  .................................................................................................................. 29 

  7.1 Packing for transport  ................................................................................................................. 29 

 

8.  Cleaning and disinfecting  ............................................................................................................. 29 

 

9.  Appendix  ........................................................................................................................................ 30 

  9.1 Self test ...................................................................................................................................... 30 
 9.2 

Troubleshooting 

......................................................................................................................... 32 

  9.3 Changing the lamp ..................................................................................................................... 34 
  9.4 Replacing the calibration block  .................................................................................................. 34 

  9.5 Color measurement overview  .................................................................................................... 36 
  9.6 Interpolated 3D-Master shades .................................................................................................. 41 
  9.7 Technical specifications ............................................................................................................. 42 
  9.8 Patents and trademarks ............................................................................................................. 42 

 9.9 

Glossary 

.................................................................................................................................... 43 

 9.10 

Warranty 

.................................................................................................................................. 44 

 

 

Symbol Definitions 

 

Attention, consult accompanying documents 

 

Single use 

 

 

 Power ON / Power Off (push-push)

 

 

Summary of Contents for Easyshade















































Reviews:

No comments