7
1
2
VITA Easyshade
®
Advance 4.0
Charging LED
indicator light
Measurement
switch
Serial number
of base unit
IR LED for
automatic
calibration
Charging pins
Power LED -
flashes green
Serial number
of calibration
block holder
Serial number
of hand piece
Input for
power unit
into the base unit so that the battery charging port fits over
the charging pins. The green LED on the hand piece (charging
indicator for the battery) flashes after the instrument has
been connected to the power supply. Let the battery of the
hand piece charge for a minimum of five hours before initial
use.
Important:
The hand piece and the calibration holder will have
the same serial number (fig. 1); if not, contact VITA (Vident
for North America only) immediately. The base unit has
a different serial number.
1.3 System setup
Open the packaging of VITA Easyshade Advance 4.0 and
remove the Quick Guide, the CD-ROM containing the
Operating Instructions and VITA ShadeAssist, the Easyshade
Advance 4.0 hand piece, base unit, the calibration block hol-
der and power supply. Attach the calibration block holder as
shown in fig. 2. The green power LED flashes on the base
unit once the power supply is connected to the wall elec-
trical outlet with a suitable adapter. Place the base unit on a
flat surface. Insert the Easyshade Advance 4.0 hand piece
Getting started