3
VITA Easyshade
®
Advance 4.0
VITA Easyshade Advance 4.0
Medical equipment, With respect to electric shock, fire and
mechanical hazards only in accordance with UL 60601-1,
IEC/EN 60601-1, CAN/CSA C22.2 No. 601.1
Attention, consult accompanying documents
Type B applied part
Single patient use only
Class II equipment
Definition of symbols
Warning
1. Attention! Use only with enclosed power supply
(GlobTek GTM41076-0605).
2. Never look directly into the VITA Easyshade Advance 4.0
probe tip when the lamp is on.
3. Do not immerse the VITA Easyshade Advance 4.0 hand piece
or base unit in water or any other liquid.
4. Follow the instructions in Section 1.4 to properly apply
an infection control shield.
5. Follow the instructions in Section 9 to properly clean
and disinfect VITA Easyshade Advance 4.0.
6. Do not expose the unit to temperatures above 60° C.
7. The general recommendations for the use of the
VITA Easyshade Advance 4.0 instrument in dentist practices
and dental laboratories must be followed.
8. Infection control shields are for single patient
use only.
9. Protect the instrument against direct sunlight.
10. The temperature to perform measurements must be
between 15°C and 40°C.
11. Do not drop the instrument to avoid the risk of breakage
or electric shocks.
Important information on electromagnetic compatibility
Portable and mobile radio frequency (RF) communications
equipment can affect medical electrical equipment. This product
is intended for use in the electromagnetic environments
specified. The user of this product should assure it is used
in such an environment.
1. Portable and mobile RF Communications equipment
(cell phones) should not be used at close distances.
2. Power frequency magnetic fields should be at levels
characteristic of a typical location in a commercial
or hospital environment.
Safety information
