17
VITA Easyshade
®
Advance 4.0
22
24
23
Modes of operation
To receive more detailed information on the measured VITA SYSTEM
3D-MASTER shade, use the arrow buttons to highlight the displayed shade
and then press the Enter key to go to the detail screen.
4.2.2 Display of the VITABLOCS shade
The VITABLOCS mode informs you which VITA block should be used for the
accurate reproduction of the measured tooth shade.
To enter this mode, highlight the BLOCS icon in the lower area of the display.
The suitable VITABLOCS in the VITA classical A1–D4 or VITA SYSTEM
3D-MASTER shades are displayed. If a suitable block is not available in the
VITA classical A1–D4 shade system (--- is displayed), use the block indicated in
the VITA SYSTEM 3D-MASTER.
In the detail screen, the shade code behind the arrow icon -> are information
on the closest mixed tooth shade. A detailed description of the screen can be
found in section 7
Note:
Compare the shade measurement with a shade tab if possible in
daylight, under standardized daylight lamps or at 5500 - 6500 K adapted to
daylight and not under normal indoor lighting!