10
9
10
8
VITA Easyshade
®
Advance 4.0
After successful calibration, the measurement menu is displayed (fig. 8)
and the unit is ready for use. The measurement mode used last is high-
lighted and activated after pressing the Select key.
If a single "beep" sounds, an error message is displayed
on the screen as shown (fig. 9).
Calibration has failed and must be repeated (see section 12.2).
Note:
Make sure not to block the IR ports above the labels
located on the hand piece and the base unit (see IR ports, fig.10).
Avoid
placing the base unit in the vicinity of a powerful infrared
light source (such as sunlight or an incandescent light),
which may interfere with the signal transmission between
the base unit and the hand piece.
During automatic calibration, do not press the measurement button.
Getting started
IR Port