63
3.9 Help
The Help information window is a popup window, so that users can open and read it without a need for
log-in.
3.10 Resetting to the factory default settings
To reset the VK2-1080VFD to the original factory settings, go to the Setup>System> Maintenance
web
page (described in
“3.6.6 System > Maintenance”) or use the control button on the VK2-1080VFD, as
described below:
• Using the Reset Button
Follow the instructions below to reset the VK2-1080VFD to the factory default settings using the
Reset Button.
1. Switch off the VK2-1080VFD by disconnecting the power adapter.
2. Open the lens cover.
3. Press and hold the Control Button (SW1) on the board with your finger while reconnecting
the power.
4. Keep the Control button (SW1) pressed during about 2 seconds.
5. Release the Control Button (SW1).
6.
The VK2-1080VFD resets to factory defaults and restarts after completing the factory
reset.
7.
Close the lens cover.
CAUTION:
When performing a Factory Reset, you will lose any settings you have saved.
Summary of Contents for ViP2 VK2-1080VFD
Page 1: ...VK2 1080VFD Installation and user manual...
Page 2: ...2...
Page 6: ...6...
Page 66: ...66...
