52
RTP
Real-time Transfer Protocol used for sending and receiving an audio or video on a real-time basis.
These settings are the IP address, port number, and Time-To-Live value to use for the media
stream(s) in multicast H.264 format. Only certain IP addresses and port numbers should be used for
multicast streams. For more information, please see the online help.
• Port Range
-
Start port:
Enter a value between 1024 and 65532
• Multicast
This function is for sending Video and Audio to Multicast groups.
-
Enable Multicast:
Check the box to enable multicast operation.
-
Multicast destination IP:
Enter an IP between 224.0.0.0 and 239.255.255.255. Although
it is empty, an IP will be entered automatically.
-
RTP port:
Enter a value between 1024 and 65532.
-
RTP TTL:
Enter a value between 1 and 255. If a network status is good, enter a lower
value. On the other hand, if a network status is poor, enter a higher value. When there are
many VK2-1080VFDs or users, a higher value may cause a heavy load to the network. For
a detailed setting, please consult with a network manager.
Summary of Contents for ViP2 VK2-1080VFD
Page 1: ...VK2 1080VFD Installation and user manual...
Page 2: ...2...
Page 6: ...6...
Page 66: ...66...
